PS-23 VECTOR BEACON

Our new high quality beacon with superior performance, guaranteed daytime visibility, ECE R65 Class II certification, with two levels of intensity, also offers  IP67 water-resistance and can be used almost anywhere and in every weather condition.

Specification:

• Superior Performance ECE R65 Class II Approval.
• Hybrid Wide-Angle Reflector Optics.
• 360 Degree Guaranteed Daytime Visibility.
• Voltage: 12/24VDC.
• Size: 112.7 mm (OD) x 117.8 mm (H).
• LED: 54 Watt High-Intensity LED’s.
• Current: 4.5A@12V; 2.25A@24V.
• Housing foot: Anodized Aluminium.
• Lens cap: Polycarbonate.
• Cable Length: 3 Meter
• Mount: Strong Magnetic suction base.
• Function Cigar plug: power on/ pattern change/ hi-low power.
• 12 Flash patterns.
• IP67.
• 360 Degree off-angle light spread.

Certification:

ECE R65 CLASS II AMBER, ECE R10 EMC

Warranty:

3 Year

960mm INVADER 2.0 LED LIGHTBAR – R65 Certified

The Invader 2.0 Lightbar is the ultimate Wide Body Lightbar that boasts with a Certified Conformity to International Standards ECE-R65 Class1 and SAE J845.

Its colorful and shiny appearance shouts Emergency Service everywhere with a futuristic and modern design to compete with its counterparts all over the World.

The 960mm Invader 2.0 Lightbar is 38.4mm high and 270.6mm deep and uses 90 super-wide FX Optic high output 1watt LEDs. These optics are designed to project the highest level of light output for its size.

Each model lightbar is supplied complete with all mounting hardware, standard with 19 scroll lock flash patterns and IP67 protection grade.

• Complies with SAE/J845 Class 1
• ECE R65 Approved
• ECE R10 EMC Compliant
• Heavy-Duty Design
• 360° High-Intensity Brightness
• 19 Selectable Flash Patterns
• Modules can be configured as single or dual color (at extra cost).
• Temp Range -40° to +60°

1400mm INVADER 2.0 LED LIGHTBAR – R65 Certified

The Invader 2.0 Lightbar is the ultimate Wide Body Lightbar that boasts with a Certified Conformity to International Standards ECE-R65 Class1 and SAE J845.

Its colorful and shiny appearance shouts Emergency Service everywhere with a futuristic and modern design to compete with its counterparts all over the World.

The 1400mm Invader 2.0 Lightbar is 38.4mm high and 270.6mm deep and uses 126 super-wide FX Optic high output 1watt LEDs. These optics are designed to project the highest level of light output for its size.

Each model lightbar is supplied complete with all mounting hardware, standard with 19 scroll lock flash patterns and IP67 protection grade.

• Complies with SAE/J845 Class 1
• ECE R65 Approved
• ECE R10 EMC Compliant
• Heavy-Duty Design
• 360° High-Intensity Brightness
• 19 Selectable Flash Patterns
• Modules can be configured as single or dual color (at extra cost).
• Temp Range -40° to +60°

SPICA X FULL LENGTH LIGHTBAR

One of the brightest, well designed lightbars that the market has seen up to now. Prisma Signal is proud to present this highly efficient lightbar, developed to suit most needs and designed and tested to comply to world standards.

Available in any colour or configuration, the Spica comes in a variety of lengths in configurations of 2, 4, 8, 12, 16 or 20 clusters along with R65 approved end caps.

The mini-bar range is mostly magnet-mounted and the full-length range can be mounted to the roof of a vehicle by means of high-quality brackets.

The Spica range comes standard with a wired configuration or with a digital controller. It can also be connected with any standard Prisma Signal controller.

Specification:

• ECE R65 Class 2 Approval
• Hybrid Wide-Angle Reflector Optics
• 360 Degree Visibility
• Voltage: 12/24VDC
• Size: 1350 mm (L) x 170 mm (D) x 54.5 mm (H)
• LED: 60, 108, 252 x 1W High-Intensity LED’s
• Current: 21A@12V; 10.5A@24V
• Housing: Anodized Aluminium
• Lens & End cap: Polycarbonate
• Cable Length: 7m for wire version and 5m for switch panel version.
• Wire or switch panel version
• Function: power on/ pattern change/ hi-low power
• 10 Flash patterns (Standard and standard plus version).
• 24 Flash patterns (Full version + 7 Traffic advisor patterns).

Versions:

• Standard: End Cap modules only.
• Standard Plus: End Cap modules plus 4 extra modules front and rear.
• Full Version: End cap modules plus 16 modules front and rear with traffic advisor functions.

Certification:

ECE R65 CLASS II FOR AMBER AND CLEAR

Warranty:

3 Year

SPICA VIII FULL LENGTH LIGHTBAR

One of the brightest, well-designed lightbars that the market has seen up to now. Prisma Signal is proud to present this highly efficient lightbar, developed to suit most needs and designed and tested to comply with world standards.

Available in any color or configuration, the Spica comes in a variety of lengths in configurations of 2, 4, 8, 12, 16 or 20 clusters along with R65 approved end caps.

The mini-bar range is mostly magnet-mounted and the full-length range can be mounted to the roof of a vehicle by means of high-quality brackets.

The Spica range comes standard with a wired configuration or with a digital controller. It can also be connected with any standard Prisma Signal controller.

Specification:

• ECE R65 Class 2 Approval
• Hybrid Wide-Angle Reflector Optics
• 360 Degree Visibility
• Voltage: 12/24VDC
• Size: 1060 mm (L) x 170 mm (D) x 54.5 mm (H)
• LED: 60, 108, 204 x 1W High-Intensity LED’s
• Current: 9-17A@12V; 4.5-8.5A@24V
• Housing: Anodized Aluminium
• Lens & End Cap: Polycarbonate
• Cable Length: 7m for wire version and 5m for switch panel version.
• Wire or switch panel version
• Function: power on/ pattern change/ hi-low power
• 10 Flash patterns (Standard and standard plus version).
• 24 Flash patterns (Full version + 7 Traffic advisor patterns).

Versions:

• Standard: 1060mm length with end caps only.

• Standard Plus: 1060mm length with end caps and 4 front led modules front and rear.

• Full Version: 1060mm length (Full House) with end caps and 12 led modules front and rear.

Certification:

ECE R65 CLASS II FOR AMBER AND CLEAR

Warranty:

3 Year

SPICA VI LED LIGHTBAR

One of the brightest, well-designed lightbars that the market has seen up to now. Prisma Signal is proud to present this highly efficient lightbar, developed to suit most needs and designed and tested to comply with world standards.

Available in any color or configuration, the Spica comes in a variety of lengths in configurations of 2, 4, 8, 12, 16 or 20 clusters along with Class II R65 approved end caps.

The mini-bar range is mostly magnet-mounted and the full-length range can be mounted to the roof of a vehicle by means of high-quality brackets.

The Spica range comes standard with a wired configuration or with a digital controller. It can also be connected with any standard Prisma Signal controller.

Specification:

• Voltage: 12/24VDC
• Size: 770 mm (L) x 170 mm (D) x 54.5 mm (H)
• LED: 108 High-Intensity LED’s
• Current: 13A@12V; 6.5A@24V
• Housing: Anodized Aluminium
• Lens & Endcap: Polycarbonate
• Cable Length: 5-7 meter
• Wire or switch panel version.
• Function: power on/ pattern change/ hi-low power
• 10 Warning Flash Patterns wired Version.
• 24 Warning Flash Patterns, plus 7 Traffic advisor Flash Patterns.

Versions:

• Standard: 770mm length with end caps only.

• Full Version: 770mm length (Full House) with end caps and 8  led modules front and rear.

Certification:

ECE R65 CLASS II FOR AMBER ONLY.

End Caps: Amber or Clear.

Warranty:

3 Year

SPICA IV MINI LIGHTBAR

One of the brightest, well designed lightbars that the market has seen up to now. Prisma Signal is proud to present this highly efficient lightbar, developed to suit most needs and designed and tested to comply to world standards.

Available in any colour or configuration, the Spica comes in a variety of lengths in configurations of 2, 4, 8, 12, 16 or 20 clusters along with R65 approved end caps.

The mini-bar range is mostly magnet-mounted and the full length range can be mounted to the roof of a vehicle by means of high quality brackets.

The Spica range comes standard with a wired configuration or with a digital controller. It can also be connected with any standard Prisma Signal controller.

Specification:

• Voltage: 12/24VDC
• Size: 480 mm (L) x 170 mm (D) x 54.5 mm (H)
• LED: 1W x 108 LED’s
• Current: 9A@12V; 4.5A@24V
• Housing: Anodized Aluminium
• Lens & End cap: Polycarbonate
• Cable Length: Wire 5m bolt mount, magnetic 3.5m + cigar plug.
• Function: power on/ pattern change/ hi-low power
• 10 Flash patterns.

Versions:

• Full Version: 480mm length (Full House) with end caps and 4 led modules front and rear.

Certification:

ECE R65 CLASS II FOR AMBER AND CLEAR

Warranty:

3 Year

SPICA XL LED LIGHTBAR

One of the brightest, well-designed lightbars that the market has seen up to now. Prisma Signal is proud to present this highly efficient lightbar, developed to suit most needs and designed and tested to comply with world standards.

Available in any color or configuration, the Spica comes in a variety of lengths in configurations of 2, 4, 8, 12, 16 or 20 clusters along with R65 approved end caps.

The mini-bar range is mostly magnet-mounted and the full-length range can be mounted to the roof of a vehicle by means of high-quality brackets.

The Spica range comes standard with wired configurations or with a digital controller. It can also be connected with any standard Prisma Signal controller.

Specification:

• ECE R65 Class 2 Approval
• Hybrid Wide-Angle Reflector Optics
• 360 Degree Visibility
• Voltage: 12/24VDC
• Size: 1638 mm (L) x 170 mm (D) x 54.5 mm (H)
• LED: 60, 108, 300 x 1W High-Intensity LED’s
• Current: 9-25A@12V; 4.5-12.5A@24V
• Housing: Anodized Aluminium
• Lens & Endcap: Polycarbonate
• Cable Length: 7m for wire version and 5m for switch panel version.
• Wire or switch panel version
• Function: power on/ pattern change/ hi-low power
• 10 Flash patterns (Standard and standard plus version).
• 24 Flash patterns (Full version + 7 Traffic advisor patterns).

Versions:

• Standard: End Cap modules only.
• Standard: Plus: End Cap modules plus 4 extra modules front and rear.
• Full Version: End cap modules plus and 20 led modules front and rear with traffic advisor functions.

Certification:

ECE R65 CLASS II FOR AMBER AND CLEAR

Warranty:

3 Year

SPICA I MINI LIGHTBAR

One of the brightest, well-designed lightbars that the market has seen up to now. Prisma Signal is proud to present this highly efficient lightbar, developed to suit most needs and designed and tested to comply to world standards.

Available in any colour or configuration, the Spica comes in a variety of lengths in configurations of 2, 4, 8, 12, 16 or 20 clusters along with R65 approved end caps.

The mini-bar range is mostly magnet-mounted and the full-length range can be mounted to the roof of a vehicle by means of high-quality brackets.

The Spica range comes standard with a wired configuration or with a digital controller. It can also be connected with any standard Prisma Signal controller.

Specification:

• Voltage: 12/24VDC.
• Size: 335 mm (L) x 170.2 mm (D) x 54.6 mm (H).
• LED: 84 High-Intensity LED’s.
• Current: 7A@12V; 3.5A@24V.
• Housing: Anodized Aluminium.
• Lens & Endcap: Polycarbonate.
• Cable Length: Wire 5m bolt mount, magnetic 3.5m + cigar plug.
• Function: power on/ pattern change/ hi-low power.
• 10 Flash patterns.

Versions:

• Full Version: 335mm length (Full House) with end caps and 2 led modules front and rear.

Certification:

ECE R65 CLASS II FOR AMBER ONLY.

End Caps: Orange or Clear.

Warranty:

3 Year

This is a very sought after R65 Class II product due to its appealing looks and multiple mounting options. The ultimate in surface mount light heads with its popular choice of single, dual, or tricolor is offered here.

Technical Specifications:
Powered by DC 10 -33V
6 Pcs, 12 or 18Pcs 3W LED with new super-thin only (7mm)
Dimensions: 118*25*7mm.
Special Optics and High-quality high-intensity LEDs.
12 selectable flash patterns with scroll lock Pattern Memory.
Simultaneously or alternately between multiple units.
Aluminum base for efficient heat dissipation.
IP-67 Standard, Weatherproof.
Long-life LEDs rated to 100,000 hours of reliable operation.
Reverse polarity protection.

Available Versions:
Single Color:  6 x 3 Watt.
Dual Color: 12 x 3 watt (Each color it’s own + wire).
Tricolor Color 18 x 3 watt (Each color it’s own + wire).

Brackets for optional choice.
3M Surface Mount.
Heat Sync Mount.
L-bracket mount
Hood mount.

Included in Box:
PS – 599 Surface Mount.
1 Rubber Gasket
L-bracket or hood mount bracket
Screws and Manual

3 Year Warranty.

PS-517 SURFACE MOUNT

This is a very sought after product due to its appealing and shiny appearance. The ultimate in surface mount light heads with its popular synchronization function, is offered here.

Naturally, like most surface mount marker lights, these are good for up-close lighting needs, but a high-up surface mount is a good tool for being seen from long distances

These are also perfect to be used with other variations to form a customized combination of modules and lights on emergency vehicles.

Technical Specifications:

• Power: 18w
• Size: 120mm Length x 32mm Height x 14mm Width
• LED: 6pcs LED
• Standard: ECE R65, R10,  SAE J595 Class 1
• Flash Pattern: 19 Patterns
• Function: Synchronization
• Mounting: Surface Mount
• Lens Color: Transparent
• Waterproof: IP68
• Voltage: 10-30V DC
• Material: PC, UV-resistant lens
• Working Temperature: -40~60°C

Warranty 3 Years

1200mm INVADER 2.0 LED LIGHTBAR – R65 Certified

The Invader 2.0 Lightbar is the ultimate Wide Body Lightbar that boasts with a Certified Conformity to International Standards ECE-R65 Class1 and SAE J845.

Its colorful and shiny appearance shouts Emergency Service everywhere with a futuristic and modern design to compete with its counterparts all over the World.

The 1200mm Invader 2.0 Lightbar is 38.4mm high and 270.6mm deep and uses 108 super-wide FX Optic high output 1watt LEDs. These optics are designed to project the highest level of light output for its size.

Each model lightbar is supplied complete with all mounting hardware, standard with 19 scroll lock flash patterns and IP67 protection grade.

• Complies with SAE/J845 Class 1
• ECE R65 Approved
• ECE R10 EMC Compliant
• Heavy-Duty Design
• 360° High-Intensity Brightness
• 19 Selectable Flash Patterns
• Modules can be configured as single or dual color (at extra cost).
• Temp Range -40° to +60°