SPICA VI LED LIGHTBAR
One of the brightest, well-designed lightbars that the market has seen up to now. Prisma Signal is proud to present this highly efficient lightbar, developed to suit most needs and designed and tested to comply with world standards.
Available in any color or configuration, the Spica comes in a variety of lengths in configurations of 2, 4, 8, 12, 16 or 20 clusters along with Class II R65 approved end caps.
The mini-bar range is mostly magnet-mounted and the full-length range can be mounted to the roof of a vehicle by means of high-quality brackets.
The Spica range comes standard with a wired configuration or with a digital controller. It can also be connected with any standard Prisma Signal controller.
Specification:
• Voltage: 12/24VDC
• Size: 770 mm (L) x 170 mm (D) x 54.5 mm (H)
• LED: 108 High-Intensity LED’s
• Current: 13A@12V; 6.5A@24V
• Housing: Anodized Aluminium
• Lens & Endcap: Polycarbonate
• Cable Length: 5-7 meter
• Wire or switch panel version.
• Function: power on/ pattern change/ hi-low power
• 10 Warning Flash Patterns wired Version.
• 24 Warning Flash Patterns, plus 7 Traffic advisor Flash Patterns.
Versions:
• Standard: 770mm length with end caps only.
• Full Version: 770mm length (Full House) with end caps and 8 led modules front and rear.
Certification:
ECE R65 CLASS II FOR AMBER ONLY.
End Caps: Amber or Clear.
Warranty:
3 Year
From: €370.00
SPICA VIII FULL LENGTH LIGHTBAR
One of the brightest, well-designed lightbars that the market has seen up to now. Prisma Signal is proud to present this highly efficient lightbar, developed to suit most needs and designed and tested to comply with world standards.
Available in any color or configuration, the Spica comes in a variety of lengths in configurations of 2, 4, 8, 12, 16 or 20 clusters along with R65 approved end caps.
The mini-bar range is mostly magnet-mounted and the full-length range can be mounted to the roof of a vehicle by means of high-quality brackets.
The Spica range comes standard with a wired configuration or with a digital controller. It can also be connected with any standard Prisma Signal controller.
Specification:
• ECE R65 Class 2 Approval
• Hybrid Wide-Angle Reflector Optics
• 360 Degree Visibility
• Voltage: 12/24VDC
• Size: 1060 mm (L) x 170 mm (D) x 54.5 mm (H)
• LED: 60, 108, 204 x 1W High-Intensity LED’s
• Current: 9-17A@12V; 4.5-8.5A@24V
• Housing: Anodized Aluminium
• Lens & End Cap: Polycarbonate
• Cable Length: 7m for wire version and 5m for switch panel version.
• Wire or switch panel version
• Function: power on/ pattern change/ hi-low power
• 10 Flash patterns (Standard and standard plus version).
• 24 Flash patterns (Full version + 7 Traffic advisor patterns).
Versions:
• Standard: 1060mm length with end caps only.
• Standard Plus: 1060mm length with end caps and 4 front led modules front and rear.
• Full Version: 1060mm length (Full House) with end caps and 12 led modules front and rear.
Certification:
ECE R65 CLASS II FOR AMBER AND CLEAR
Warranty:
3 Year
From: €417.25
SPICA X FULL LENGTH LIGHTBAR
One of the brightest, well designed lightbars that the market has seen up to now. Prisma Signal is proud to present this highly efficient lightbar, developed to suit most needs and designed and tested to comply to world standards.
Available in any colour or configuration, the Spica comes in a variety of lengths in configurations of 2, 4, 8, 12, 16 or 20 clusters along with R65 approved end caps.
The mini-bar range is mostly magnet-mounted and the full-length range can be mounted to the roof of a vehicle by means of high-quality brackets.
The Spica range comes standard with a wired configuration or with a digital controller. It can also be connected with any standard Prisma Signal controller.
Specification:
• ECE R65 Class 2 Approval
• Hybrid Wide-Angle Reflector Optics
• 360 Degree Visibility
• Voltage: 12/24VDC
• Size: 1350 mm (L) x 170 mm (D) x 54.5 mm (H)
• LED: 60, 108, 252 x 1W High-Intensity LED’s
• Current: 21A@12V; 10.5A@24V
• Housing: Anodized Aluminium
• Lens & End cap: Polycarbonate
• Cable Length: 7m for wire version and 5m for switch panel version.
• Wire or switch panel version
• Function: power on/ pattern change/ hi-low power
• 10 Flash patterns (Standard and standard plus version).
• 24 Flash patterns (Full version + 7 Traffic advisor patterns).
Versions:
• Standard: End Cap modules only.
• Standard Plus: End Cap modules plus 4 extra modules front and rear.
• Full Version: End cap modules plus 16 modules front and rear with traffic advisor functions.
Certification:
ECE R65 CLASS II FOR AMBER AND CLEAR
Warranty:
3 Year
From: €512.95
SPICA XL LED LIGHTBAR
One of the brightest, well-designed lightbars that the market has seen up to now. Prisma Signal is proud to present this highly efficient lightbar, developed to suit most needs and designed and tested to comply with world standards.
Available in any color or configuration, the Spica comes in a variety of lengths in configurations of 2, 4, 8, 12, 16 or 20 clusters along with R65 approved end caps.
The mini-bar range is mostly magnet-mounted and the full-length range can be mounted to the roof of a vehicle by means of high-quality brackets.
The Spica range comes standard with wired configurations or with a digital controller. It can also be connected with any standard Prisma Signal controller.
Specification:
• ECE R65 Class 2 Approval
• Hybrid Wide-Angle Reflector Optics
• 360 Degree Visibility
• Voltage: 12/24VDC
• Size: 1638 mm (L) x 170 mm (D) x 54.5 mm (H)
• LED: 60, 108, 300 x 1W High-Intensity LED’s
• Current: 9-25A@12V; 4.5-12.5A@24V
• Housing: Anodized Aluminium
• Lens & Endcap: Polycarbonate
• Cable Length: 7m for wire version and 5m for switch panel version.
• Wire or switch panel version
• Function: power on/ pattern change/ hi-low power
• 10 Flash patterns (Standard and standard plus version).
• 24 Flash patterns (Full version + 7 Traffic advisor patterns).
Versions:
• Standard: End Cap modules only.
• Standard: Plus: End Cap modules plus 4 extra modules front and rear.
• Full Version: End cap modules plus and 20 led modules front and rear with traffic advisor functions.
Certification:
ECE R65 CLASS II FOR AMBER AND CLEAR
Warranty:
3 Year
From: €558.95
960mm INVADER 2.0 LED LIGHTBAR – R65 Certified
The Invader 2.0 Lightbar is the ultimate Wide Body Lightbar that boasts with a Certified Conformity to International Standards ECE-R65 Class1 and SAE J845.
Its colorful and shiny appearance shouts Emergency Service everywhere with a futuristic and modern design to compete with its counterparts all over the World.
The 960mm Invader 2.0 Lightbar is 38.4mm high and 270.6mm deep and uses 90 super-wide FX Optic high output 1watt LEDs. These optics are designed to project the highest level of light output for its size.
Each model lightbar is supplied complete with all mounting hardware, standard with 19 scroll lock flash patterns and IP67 protection grade.
| Power | 90W |
| Length | 960mm |
| LED | 90pcs LED |
| Standard | ECE R65, R10, SAE J845 |
| Flash Pattern | 19 Patterns |
| Mounting | Bracket mount |
| Service Life | ≥50000 hours |
| LED Color | Amber, Blue, Red, White |
| Lens Color | Clear |
| Waterproof | IP67 |
| Voltage | 10-30V DC |
| Warranty | 3 Years |
| Material | UV-resistant lens |
| Working Temperature | -40~60°C |
• Complies with SAE/J845 Class 1
• ECE R65 Approved
• ECE R10 EMC Compliant
• Heavy-Duty Design
• 360° High-Intensity Brightness
• 19 Selectable Flash Patterns
• Modules can be configured as single or dual color (at extra cost).
• Temp Range -40° to +60°
From: €576.00€425.00
1200mm INVADER 2.0 LED LIGHTBAR – R65 Certified
The Invader 2.0 Lightbar is the ultimate Wide Body Lightbar that boasts with a Certified Conformity to International Standards ECE-R65 Class1 and SAE J845.
Its colorful and shiny appearance shouts Emergency Service everywhere with a futuristic and modern design to compete with its counterparts all over the World.
The 1200mm Invader 2.0 Lightbar is 38.4mm high and 270.6mm deep and uses 108 super-wide FX Optic high output 1watt LEDs. These optics are designed to project the highest level of light output for its size.
Each model lightbar is supplied complete with all mounting hardware, standard with 19 scroll lock flash patterns and IP67 protection grade.
| Power | 18W |
| Length | 1200mm |
| LED | 108pcs LED |
| Standard | ECE R65, R10, SAE J845 |
| Flash Pattern | 19 Patterns |
| Mounting | Bracket mount |
| Service Life | ≥50000 hours |
| LED Color | Amber, Blue, Red, White |
| Lens Color | Clear |
| Waterproof | IP67 |
| Voltage | 10-30V DC |
| Warranty | 3 Years |
| Material | UV-resistant lens |
| Working Temperature | -40~60°C |
• Complies with SAE/J845 Class 1
• ECE R65 Approved
• ECE R10 EMC Compliant
• Heavy-Duty Design
• 360° High-Intensity Brightness
• 19 Selectable Flash Patterns
• Modules can be configured as single or dual color (at extra cost).
• Temp Range -40° to +60°
From: €739.50€530.00
1400mm INVADER 2.0 LED LIGHTBAR – R65 Certified
The Invader 2.0 Lightbar is the ultimate Wide Body Lightbar that boasts with a Certified Conformity to International Standards ECE-R65 Class1 and SAE J845.
Its colorful and shiny appearance shouts Emergency Service everywhere with a futuristic and modern design to compete with its counterparts all over the World.
The 1400mm Invader 2.0 Lightbar is 38.4mm high and 270.6mm deep and uses 126 super-wide FX Optic high output 1watt LEDs. These optics are designed to project the highest level of light output for its size.
Each model lightbar is supplied complete with all mounting hardware, standard with 19 scroll lock flash patterns and IP67 protection grade.
| Power | 126W |
| Length | 1400mm |
| LED | 126pcs LED |
| Standard | ECE R65, R10, SAE J845 |
| Flash Pattern | 19 Patterns |
| Mounting | Bracket mount |
| Service Life | ≥50000 hours |
| LED Color | Amber, Blue, Red, White |
| Lens Color | Clear |
| Waterproof | IP67 |
| Voltage | 10-30V DC |
| Warranty | 3 Years |
| Material | UV-resistant lens |
| Working Temperature | -40~60°C |
• Complies with SAE/J845 Class 1
• ECE R65 Approved
• ECE R10 EMC Compliant
• Heavy-Duty Design
• 360° High-Intensity Brightness
• 19 Selectable Flash Patterns
• Modules can be configured as single or dual color (at extra cost).
• Temp Range -40° to +60°
From: €846.25€745.00
SPICA VI LED LIGHTBAR
One of the brightest, well-designed lightbars that the market has seen up to now. Prisma Signal is proud to present this highly efficient lightbar, developed to suit most needs and designed and tested to comply with world standards.
Available in any color or configuration, the Spica comes in a variety of lengths in configurations of 2, 4, 8, 12, 16 or 20 clusters along with Class II R65 approved end caps.
The mini-bar range is mostly magnet-mounted and the full-length range can be mounted to the roof of a vehicle by means of high-quality brackets.
The Spica range comes standard with a wired configuration or with a digital controller. It can also be connected with any standard Prisma Signal controller.
Specification:
• Voltage: 12/24VDC
• Size: 770 mm (L) x 170 mm (D) x 54.5 mm (H)
• LED: 108 High-Intensity LED’s
• Current: 13A@12V; 6.5A@24V
• Housing: Anodized Aluminium
• Lens & Endcap: Polycarbonate
• Cable Length: 5-7 meter
• Wire or switch panel version.
• Function: power on/ pattern change/ hi-low power
• 10 Warning Flash Patterns wired Version.
• 24 Warning Flash Patterns, plus 7 Traffic advisor Flash Patterns.
Versions:
• Standard: 770mm length with end caps only.
• Full Version: 770mm length (Full House) with end caps and 8 led modules front and rear.
Certification:
ECE R65 CLASS II FOR AMBER ONLY.
End Caps: Amber or Clear.
Warranty:
3 Year
From: €370.00
SPICA VIII FULL LENGTH LIGHTBAR
One of the brightest, well-designed lightbars that the market has seen up to now. Prisma Signal is proud to present this highly efficient lightbar, developed to suit most needs and designed and tested to comply with world standards.
Available in any color or configuration, the Spica comes in a variety of lengths in configurations of 2, 4, 8, 12, 16 or 20 clusters along with R65 approved end caps.
The mini-bar range is mostly magnet-mounted and the full-length range can be mounted to the roof of a vehicle by means of high-quality brackets.
The Spica range comes standard with a wired configuration or with a digital controller. It can also be connected with any standard Prisma Signal controller.
Specification:
• ECE R65 Class 2 Approval
• Hybrid Wide-Angle Reflector Optics
• 360 Degree Visibility
• Voltage: 12/24VDC
• Size: 1060 mm (L) x 170 mm (D) x 54.5 mm (H)
• LED: 60, 108, 204 x 1W High-Intensity LED’s
• Current: 9-17A@12V; 4.5-8.5A@24V
• Housing: Anodized Aluminium
• Lens & End Cap: Polycarbonate
• Cable Length: 7m for wire version and 5m for switch panel version.
• Wire or switch panel version
• Function: power on/ pattern change/ hi-low power
• 10 Flash patterns (Standard and standard plus version).
• 24 Flash patterns (Full version + 7 Traffic advisor patterns).
Versions:
• Standard: 1060mm length with end caps only.
• Standard Plus: 1060mm length with end caps and 4 front led modules front and rear.
• Full Version: 1060mm length (Full House) with end caps and 12 led modules front and rear.
Certification:
ECE R65 CLASS II FOR AMBER AND CLEAR
Warranty:
3 Year
From: €417.25
SPICA X FULL LENGTH LIGHTBAR
One of the brightest, well designed lightbars that the market has seen up to now. Prisma Signal is proud to present this highly efficient lightbar, developed to suit most needs and designed and tested to comply to world standards.
Available in any colour or configuration, the Spica comes in a variety of lengths in configurations of 2, 4, 8, 12, 16 or 20 clusters along with R65 approved end caps.
The mini-bar range is mostly magnet-mounted and the full-length range can be mounted to the roof of a vehicle by means of high-quality brackets.
The Spica range comes standard with a wired configuration or with a digital controller. It can also be connected with any standard Prisma Signal controller.
Specification:
• ECE R65 Class 2 Approval
• Hybrid Wide-Angle Reflector Optics
• 360 Degree Visibility
• Voltage: 12/24VDC
• Size: 1350 mm (L) x 170 mm (D) x 54.5 mm (H)
• LED: 60, 108, 252 x 1W High-Intensity LED’s
• Current: 21A@12V; 10.5A@24V
• Housing: Anodized Aluminium
• Lens & End cap: Polycarbonate
• Cable Length: 7m for wire version and 5m for switch panel version.
• Wire or switch panel version
• Function: power on/ pattern change/ hi-low power
• 10 Flash patterns (Standard and standard plus version).
• 24 Flash patterns (Full version + 7 Traffic advisor patterns).
Versions:
• Standard: End Cap modules only.
• Standard Plus: End Cap modules plus 4 extra modules front and rear.
• Full Version: End cap modules plus 16 modules front and rear with traffic advisor functions.
Certification:
ECE R65 CLASS II FOR AMBER AND CLEAR
Warranty:
3 Year
From: €512.95
SPICA XL LED LIGHTBAR
One of the brightest, well-designed lightbars that the market has seen up to now. Prisma Signal is proud to present this highly efficient lightbar, developed to suit most needs and designed and tested to comply with world standards.
Available in any color or configuration, the Spica comes in a variety of lengths in configurations of 2, 4, 8, 12, 16 or 20 clusters along with R65 approved end caps.
The mini-bar range is mostly magnet-mounted and the full-length range can be mounted to the roof of a vehicle by means of high-quality brackets.
The Spica range comes standard with wired configurations or with a digital controller. It can also be connected with any standard Prisma Signal controller.
Specification:
• ECE R65 Class 2 Approval
• Hybrid Wide-Angle Reflector Optics
• 360 Degree Visibility
• Voltage: 12/24VDC
• Size: 1638 mm (L) x 170 mm (D) x 54.5 mm (H)
• LED: 60, 108, 300 x 1W High-Intensity LED’s
• Current: 9-25A@12V; 4.5-12.5A@24V
• Housing: Anodized Aluminium
• Lens & Endcap: Polycarbonate
• Cable Length: 7m for wire version and 5m for switch panel version.
• Wire or switch panel version
• Function: power on/ pattern change/ hi-low power
• 10 Flash patterns (Standard and standard plus version).
• 24 Flash patterns (Full version + 7 Traffic advisor patterns).
Versions:
• Standard: End Cap modules only.
• Standard: Plus: End Cap modules plus 4 extra modules front and rear.
• Full Version: End cap modules plus and 20 led modules front and rear with traffic advisor functions.
Certification:
ECE R65 CLASS II FOR AMBER AND CLEAR
Warranty:
3 Year
From: €558.95
960mm INVADER 2.0 LED LIGHTBAR – R65 Certified
The Invader 2.0 Lightbar is the ultimate Wide Body Lightbar that boasts with a Certified Conformity to International Standards ECE-R65 Class1 and SAE J845.
Its colorful and shiny appearance shouts Emergency Service everywhere with a futuristic and modern design to compete with its counterparts all over the World.
The 960mm Invader 2.0 Lightbar is 38.4mm high and 270.6mm deep and uses 90 super-wide FX Optic high output 1watt LEDs. These optics are designed to project the highest level of light output for its size.
Each model lightbar is supplied complete with all mounting hardware, standard with 19 scroll lock flash patterns and IP67 protection grade.
| Power | 90W |
| Length | 960mm |
| LED | 90pcs LED |
| Standard | ECE R65, R10, SAE J845 |
| Flash Pattern | 19 Patterns |
| Mounting | Bracket mount |
| Service Life | ≥50000 hours |
| LED Color | Amber, Blue, Red, White |
| Lens Color | Clear |
| Waterproof | IP67 |
| Voltage | 10-30V DC |
| Warranty | 3 Years |
| Material | UV-resistant lens |
| Working Temperature | -40~60°C |
• Complies with SAE/J845 Class 1
• ECE R65 Approved
• ECE R10 EMC Compliant
• Heavy-Duty Design
• 360° High-Intensity Brightness
• 19 Selectable Flash Patterns
• Modules can be configured as single or dual color (at extra cost).
• Temp Range -40° to +60°
From: €576.00€425.00
1200mm INVADER 2.0 LED LIGHTBAR – R65 Certified
The Invader 2.0 Lightbar is the ultimate Wide Body Lightbar that boasts with a Certified Conformity to International Standards ECE-R65 Class1 and SAE J845.
Its colorful and shiny appearance shouts Emergency Service everywhere with a futuristic and modern design to compete with its counterparts all over the World.
The 1200mm Invader 2.0 Lightbar is 38.4mm high and 270.6mm deep and uses 108 super-wide FX Optic high output 1watt LEDs. These optics are designed to project the highest level of light output for its size.
Each model lightbar is supplied complete with all mounting hardware, standard with 19 scroll lock flash patterns and IP67 protection grade.
| Power | 18W |
| Length | 1200mm |
| LED | 108pcs LED |
| Standard | ECE R65, R10, SAE J845 |
| Flash Pattern | 19 Patterns |
| Mounting | Bracket mount |
| Service Life | ≥50000 hours |
| LED Color | Amber, Blue, Red, White |
| Lens Color | Clear |
| Waterproof | IP67 |
| Voltage | 10-30V DC |
| Warranty | 3 Years |
| Material | UV-resistant lens |
| Working Temperature | -40~60°C |
• Complies with SAE/J845 Class 1
• ECE R65 Approved
• ECE R10 EMC Compliant
• Heavy-Duty Design
• 360° High-Intensity Brightness
• 19 Selectable Flash Patterns
• Modules can be configured as single or dual color (at extra cost).
• Temp Range -40° to +60°
From: €739.50€530.00
1400mm INVADER 2.0 LED LIGHTBAR – R65 Certified
The Invader 2.0 Lightbar is the ultimate Wide Body Lightbar that boasts with a Certified Conformity to International Standards ECE-R65 Class1 and SAE J845.
Its colorful and shiny appearance shouts Emergency Service everywhere with a futuristic and modern design to compete with its counterparts all over the World.
The 1400mm Invader 2.0 Lightbar is 38.4mm high and 270.6mm deep and uses 126 super-wide FX Optic high output 1watt LEDs. These optics are designed to project the highest level of light output for its size.
Each model lightbar is supplied complete with all mounting hardware, standard with 19 scroll lock flash patterns and IP67 protection grade.
| Power | 126W |
| Length | 1400mm |
| LED | 126pcs LED |
| Standard | ECE R65, R10, SAE J845 |
| Flash Pattern | 19 Patterns |
| Mounting | Bracket mount |
| Service Life | ≥50000 hours |
| LED Color | Amber, Blue, Red, White |
| Lens Color | Clear |
| Waterproof | IP67 |
| Voltage | 10-30V DC |
| Warranty | 3 Years |
| Material | UV-resistant lens |
| Working Temperature | -40~60°C |
• Complies with SAE/J845 Class 1
• ECE R65 Approved
• ECE R10 EMC Compliant
• Heavy-Duty Design
• 360° High-Intensity Brightness
• 19 Selectable Flash Patterns
• Modules can be configured as single or dual color (at extra cost).
• Temp Range -40° to +60°
From: €846.25€745.00
